Main stages of creation of the Turbine (turbines) Control System:
- Survey of the object to be automated.
- Development and approval of the terms of reference for the creation of the control system. Development and coordination with the “Customer” of the structural scheme of the control system.
- Preliminary design.
- Development of preliminary design solutions for the system and its parts.
- Development of documentation for the control system and its parts.
- Technical project..
- Development of design solutions for the system and its parts.
- Development of documentation for the control system and its parts.
- Development and execution of documentation for delivery of products to complete the control system and (or) technical requirements (technical tasks) for their development.
- Development of design tasks in adjacent parts of the automation object project.
- Working documentation.
- Development of working documentation for the system and its parts.
- Development or adaptation of programs.
- Manufacturing of the control system.
- Factory acceptance tests.
- Shipment of the control system.
- Preparation of authorization documentation.
- Commissioning.
- Preparation of the automation object for commissioning of the control system.
- Personnel training.
- Construction and installation works.
- Start-up and adjustment works.
- Conducting preliminary tests.
- Pilot operation.
- Conducting acceptance tests.
- Introduction and coordination of changes in the project documentation.
- Support of SC.
- Performance of works in accordance with warranty obligations.
- Post-warranty service.
Holland Controls B.V.
DMEnergy is the official representative of Holland Controls in the Russian Federation.
Many Holland Controls engineers were employees of Rolls-Royce and have extensive experience with Rolls-Royce gas turbine control systems, as well as with control systems for gas turbines from GE, Siemens and others.
Holland Controls have a long history in the oil and gas industry worldwide and are SCC* 2004/04 (systems safety) and ISO-9001-2008 (systems quality) certified.
Services
Control System Modernization
Holland Controls offers control system solutions for gas and steam turbines, compressor stations. Control system modernization extends the life of your equipment, thereby increasing your company’s revenue.
Control systems age faster than the equipment for which they are installed. Holland Controls can perform various levels of upgrades depending on the customer’s need, allocated budget, and the knowledge of the engineers on site.
Benefits of control system modernization:
- Fast data logging
- Visualization of performance
- Modern, powerful PLCs
- Retention of all data
- Improved event differentiation
- Easy connection to remote systems
- Wide range of control system components including Siemens AG (Germany), Yokogawa Electric Corporation (Japan), Honeywell Enraf (USA), Invensys system (USA), ABB (Switzerland).
Holland Controls can perform modernization of different sizes: complete, limited, modernization of control system only or field instrumentation only.
Engineering services
Holland-Controls provides a full range of engineering services:
- Drafting of technical specifications,
- Hardware and software design,
- System and device kitting,
- Diagnostics,
- Gas turbine maintenance.
Consulting services
- design specifications,
- independent technical evaluation,
- factory testing,
- commissioning.
Turbine control systems
Holland-Controls engineering activities comply with all requirements of the European standards NEN-EN-ISO 9001:2000 and the Safety and Health Certificate (SCC).
Holland-Controls’ core business is turbine control systems. Over the last 20 years engineers have designed and installed more than 200 control systems for GTUs of various types and manufacturers. Holland Controls specialists also provide technical support and maintenance of control systems.
Holland-Controls uses equipment of the following brands in its gas turbine control systems: OPRA, Rolls-Royce, Solar, Ruston, General Electric, Pratt & Whitney, IGTS (EECT), Bently Nevada, Schenck, SAE-Stahl, Wonderware, Daniels and others.
Over the years Holland-Controls has completed a number of projects on Cooper-Bessemer, Ingersoll Rand, Superior gas turbine drive control systems.
Holland-Controls has customized over 30 gas turbine control systems in the last 5 years.
There is no other such independent company with such a wealth of experience in the entire world. Holland-Controls continues to support some control systems that the original manufacturer has discontinued doing so.
Holland-Controls uses equipment from the world’s leading control manufacturers such as Siemens, Rockwell – Allen Bradley, Rolls-Royce, ABB, GE-Fanuc and others. Holland-Controls has designed many systems on the extremely powerful, safe and reliable Siemens S7-300 platform.
Siemens has an excellent reputation: spare parts can often be obtained within one day. Siemens is now the worldwide brand of programmable logic controllers (PLC). It is confirmed by years of experience that Siemens, continues to support its systems even when they become significantly obsolete. The previous Siemens S5 system will be supported after 35 years from the release date.